Features and Applications

Features and Benefit
  • TDR/TDT Loop-through Heads (400 mV pulse amplitude) and High-amplitude TDT Heads (2 V pulse amplitude)
  • TDR/TDT Loop-through Heads (400 mV pulse amplitude) and High-amplitude TDT Heads (2 V pulse amplitude)
  • Flat pulses
  • Less than 3 ps typ. RMS Jitter
  • SMA-type input/output connectors
  • 50-cm extended cable to reduce the input cable losses
Applications
  • High-resolution single-ended, common and differential TDR/TDT
  • Ability use with UDS-2214 sampling oscilloscope
  • Transmission Line Quality
  • Impedance Measurements
  • Crosstalk Measurements

Product Description

The UDX-G11/-12/-13/-14 are single-ended pulse heads used for high-resolution TDR/TDT measurements in concern with the UDS-2214 sampling oscilloscope. They provide fast pulses having both positive or negative polarities, rise time of 100 ps and flat transient response.

UDX-G11 Head: The top waveform shows distortions caused by cables and connectors with reflected rise time of 202.5 ps. The bottom waveform shows how normalization corrects for these distortions. Normalized rise time is 101.6 ps.

The UDX-G11 and UDX-G13 are TDR/TDT Loop-through Heads having 400-mV pulse amplitude, while the UDX-G12 and UDX-G14 are TDT Heads having increased 2-V pulse amplitude.

Different configurations of the heads provide single-ended, common and differential TDR/TDT measurements.

Normalization as an error-correction process is available. It helps ensure that TDR and TDT measurements are as accurate as possible.

Specifications and Characteristics


Compatibility

Compatible with all UDS-2000 Series sampling oscilloscopes.

Heads — UDX-G11 and UDX-G13

TDR/TDT Loop-through Heads

Heads — UDX-G12 and UDX-G14

TDT Heads

Pulse Polarity — UDX-G11 and UDX-G12

Positive

Pulse Polarity — UDX-G11 and UDX-G14

Negative

Pulse Amplitude — UDX-G11 and UDX-G13

400 mV typ. terminated on 50 Ohm on both outputs

Pulse Amplitude — UDX-G11 and UDX-G14

2 V typ. terminated on 50 Ohm

Rise Time

100 ps typ

Aberrations after step

Overshoot: < 10%
For the first 150 ps following step transition: < ± 6%,
150 ps to 2 ns following step transition: < ± 4%,
2 ns to 100 ns following step transition: < ± 2%.

Displayed RMS Jitter with UDS-2214

3.5 ps (maximum), 3.0 ps (typical)

Input Connectors — UDX-G11 and UDX-G13

SMA (m), SMA (f)

Input Connectors — UDX-G11 and UDX-G14

SMA (m), SMA (f)

Cable Length

70 cm

Dimensions

Width: 95 mm, Height: 25.4 mm, Depth: 25.4 mm

Weight

180 g



Downloads