Eltesta delivers wide range of external heads providing some unique measurement capabilities for UDS-2000 Series of PC-Sampling Oscilloscopes.
There are three types of the heads – Trigger Heads, Clock Recovery Heads and Pulse Heads.
UDX-T01 Trigger Head
Key specifications
• Trigger-countdown Head
• 500 MHz to 10 GHz Trigger Bandwidth
• High sensitivity of 100 mV p-p.
• Less Than 2.5 ps max RMS Jitter.
UDX-P01 and UDX-P02 Prescale Trigger Heads
Key specifications
• 500 MHz to 12 GHz (UDX-P01)
• and to 18 GHz (UDX-P02)
• Less Than 2.5 ps max, 2.0 ps typ. RMS Jitte
• High sensitivity of 100 mV p-p.
• Less Than 2.5 ps max RMS Jitter.
UDX-P03 Low-Jitter Trigger Head
Key specifications
• Trigger-prescaled Head
• 2 GHz to 12 GHz Trigger Bandwidth
• High sensitivity of 200 mV p-p up to 8 GHz
• Less than 300 fs typ. RMS Jitter
• 1-m extended cable to reduce the input cable losses
UDX-R01, UDX-R02 and UDX-R03 Clock Recovery Heads
Key specifications
• 622 Mbps (UDX-R01), 2.488 Gbps (UDX-R02)
• and 10 Mbps to 2.7 Gbps Continuous
Rate (UDX-R03) Clock
• Low Jitter
• 1-m extended cable to reduce the input cable losses
UDX-G01 Pulse Head
Key specifications
• Tunnel Diode Pulse Head
• 200 mV into 50 Ohm Amplitude
• T50-Ohm Source
• Low Aberrations
• 2 ps typical Displayed RMS Jitter
UDX-G11, UDX-G12, UDX-G13 and UDX-G14 Pulse Heads
Key specifications
• Interchangeable Pulse Heads with Fixed
Amplitudes of 2 V (UDX-G12, UDX-G14)
or 400 mV (UDX-G11, UDX-G13)
Loop-through TDR/TDT Heads
(UDX-G11, UDX-G13), or TDT Heads
(UDX-G12, UDX-G14).
Low Aberrations. 3 ps typical Displayed
RMS Jitter