Heads


Eltesta delivers wide range of external heads providing some unique measurement capabilities for UDS-2000 Series of PC-Sampling Oscilloscopes.
There are three types of the heads - Trigger Heads, Clock Recovery Heads and Pulse Heads.

UDX-T01 Trigger Head

UDX-P01 and UDX-P02 Prescale Trigger Heads

UDX-P03 Low-Jitter Trigger Head

Key specifications

• Trigger-countdown Head

• 500 MHz to 10 GHz Trigger Bandwidth

• High sensitivity of 100 mV p-p.

• Less Than 2.5 ps max RMS Jitter.

Key specifications

• 500 MHz to 12 GHz (UDX-P01)

• and to 18 GHz (UDX-P02)

• Less Than 2.5 ps max, 2.0 ps typ. RMS Jitte

• High sensitivity of 100 mV p-p.

• Less Than 2.5 ps max RMS Jitter.

Key specifications

• Trigger-prescaled Head

• 2 GHz to 12 GHz Trigger Bandwidth

• High sensitivity of 200 mV p-p up to 8 GHz

• Less than 300 fs typ. RMS Jitter

• 1-m extended cable to reduce the input cable losses

UDX-R01, UDX-R02 and UDX-R03 Clock Recovery Heads

UDX-G01 Pulse Head

UDX-G11, UDX-G12, UDX-G13 and UDX-G14 Pulse Heads

Key specifications

• 622 Mbps (UDX-R01), 2.488 Gbps (UDX-R02)

• and 10 Mbps to 2.7 Gbps Continuous

Rate (UDX-R03) Clock

• Low Jitter

• 1-m extended cable to reduce the input cable losses

Key specifications

• Tunnel Diode Pulse Head

• 200 mV into 50 Ohm Amplitude

• T50-Ohm Source

• Low Aberrations

• 2 ps typical Displayed RMS Jitter

Key specifications

• Interchangeable Pulse Heads with Fixed

Amplitudes of 2 V (UDX-G12, UDX-G14)

or 400 mV (UDX-G11, UDX-G13)

Loop-through TDR/TDT Heads

(UDX-G11, UDX-G13), or TDT Heads

(UDX-G12, UDX-G14).

Low Aberrations. 3 ps typical Displayed

RMS Jitter